Recent content by Wiskey Bravo

You said you switched all the cables from one unit to the other. Did the same unit still not work, or did the issue move to the other one? If everything works on unit 2, regardless of which power, USB, and video you use, and unit 1 still doesn't power up, unit 1 may be bad. I'd get with FSB...

That's awesome! Can't wait to see more.

Is the full panel going to include the C172 switch panel shown or will that be an add-on once it's made available?

FW was good. I responded via email on 11/12 with the problem and solution I worked out. Thanks for asking.

I would also love to see this happen. Mostly because the FSB Launcher stopped working with the Audio Panel. There are lots of AP buttons that the launcher is mapping to both AP and PFD functions for some reason. It makes using the AP impossible.

So, I have my new G1000 TNxi panels installed and the popouts are working, but I have two questions. 1. I have G1000 #1 configured as a G3X Touch, but I G1000 #2 doesn't have the option to also set as G3X Touch. The FS2020 aircraft in use is the Asobo King Air 350i, which uses G3X for both the...

That's great to hear! I look forward to seeing what comes out of the lab!

If I follow your problem description, the behavior you describe is a funciton of MS Flight Simulator, not the FSB G1000 units. The G1000 pop-out is a Flight Sim feature, and as a result, each time you restart a flight or load another G1000-equipped aircraft, the FS G1000 units have to be...

I really just need a laser cutter. The new brackets are only 3mm plastic and would cut easily with a good bandsaw or laser cutter. If I had the latter, I'd buy some new 3mm sheets and lay out my own. Unfortunately, I don't have a laser cutter or 3D printer. I may have to see if SendCutSend...

I received my G1000 TNxi and have to say, they look amazing! I can't wait to mount them in my panel. That said, the mount adapters that are included are just a tad too large to work in my space-saver panel. Is it possible to have those trimmed down about 4 - 5mm on the outside edges? I may...

So, the panel rendering shows that the cutouts have 45-degree corners with holes. Are those threaded to accept the M2.5 screws that ship with the new G1000 units? Also, how much do the basic and premium panels weigh?

FSB delivers! I can't wait to upgrade mine. The new units look stunning.

That's great news. I look forward to seeing what new products become available.

I see that the FSB advanced panel is no longer shown on the panel page. Given the acquisition of FV, will that panel still be offered in the future? Furthermore, will there be other options coming down the line as well?