Good afternoon;
Got the audio panel button lights successfully working with XPlane 12 and the new launcher after getting rid of the X-Plane 11.txt file in the root app library. The audio panel now functions normally for comm 1/2 transmit and monitor functions, but the NAV1/2, DME, and ADF buttons and lighting only operate momentarily when the button is pressed and held. I cannot press the button and select the NAV, DME, or ADF into continuous monitor, but when I press the NAV buttons and hold them, the NAV frequency display changes to ID mode, which tells me that the radio is going into NAV monitor, but it wont remain selected. The functionality of the native XPlane G1000 audio panel functions in toggle mode as it should and the lighting is correct on the tactile FSB audio panel when monitor modes are changed natively within XPlane. The settings within XPlane have those buttons set to toggle. I have tried updating the firmware twice now and it has no effect on those four buttons. Any suggestions?
Michael
Got the audio panel button lights successfully working with XPlane 12 and the new launcher after getting rid of the X-Plane 11.txt file in the root app library. The audio panel now functions normally for comm 1/2 transmit and monitor functions, but the NAV1/2, DME, and ADF buttons and lighting only operate momentarily when the button is pressed and held. I cannot press the button and select the NAV, DME, or ADF into continuous monitor, but when I press the NAV buttons and hold them, the NAV frequency display changes to ID mode, which tells me that the radio is going into NAV monitor, but it wont remain selected. The functionality of the native XPlane G1000 audio panel functions in toggle mode as it should and the lighting is correct on the tactile FSB audio panel when monitor modes are changed natively within XPlane. The settings within XPlane have those buttons set to toggle. I have tried updating the firmware twice now and it has no effect on those four buttons. Any suggestions?
Michael
