maca
New member
Hi
I received the package today. I followed the instructions from this link:
Installed FSBHub v1.16.0
And this:
The buttons are not responding. I tested both G1000 TNxi as PFD and MFD but I got the same results.
When I launch the sim thru the FlightSimBuilder Hub it shows all the time som connection: Waiting even when the sim is completely running and the 172 on the runway.
Videos:
I've also attached the log.txt
Thanks
I received the package today. I followed the instructions from this link:
FlightSimBuilder Hub
Download the latest version of the launcher: FSBHub v1.16.0 Update Highlights:- G1000Tnxi Support Prior Versions FSBLauncher v1.14.4 Note for Users Unable to Update Unit Firmware: If you have an older unit and are prompted to update the firmware, but nothing happens after unplugging and...
flightsimbuilder.com
Installed FSBHub v1.16.0
And this:
FlightSimBuilder G1000TNxi Instructions
I. General Setup Connect the three provided cables to your unit: USB HDMI Power supply To power off the unit, press and hold the Left ⇄ button. To adjust the button backlight intensity, rotate the top-right knob labeled VOL Push SQ. II. Touchscreen Configuration If your unit has a touchscreen...
flightsimbuilder.com
The buttons are not responding. I tested both G1000 TNxi as PFD and MFD but I got the same results.
When I launch the sim thru the FlightSimBuilder Hub it shows all the time som connection: Waiting even when the sim is completely running and the 172 on the runway.
Videos:
I've also attached the log.txt
Thanks
