Delayed reaction in the G1000 when turning knobs.

[BobintheLand]

I use the G1000 with my Honeycomb Alpha and Bravo controls. When I turn any of the knobs on the G1000, there is a delayed response or no response. This happens with HDG, ALT, FMS, Range, and all the other knobs. Am I getting a conflict with the Bravo settings? My USB is directly connected to my USB 3.0 port on the computer, so there is no hub creating the problem. Should I be using a USB 2.0 port?

 

[BobintheLand]

OK. After screwing around for a day, I finally was able to get the MFD to work by HOLDING the <--> on the upper right for about 5 seconds. I had been just pressing the button momentarily and it never switched from the PFD to MFD. The instructions should emphasize to HOLD the button until you get an audible response. Now everything is working as expected with no delay.

 

[Administrator]

Thank you for the update! We do have it in the instructions to hold the <-> key until buttons are flashing but I also made it bold to stand out.