Hub (Sept 3) G1000 swapped PFD/MFD bug, and Audio-panel useless

[numberonesuperguy]

Hi,

Hub-software bug in x-plane:
The G1000 panels PFD and MFD designation can be reversed, depending on USB plug order (in my USB-hub).

This new Hub software seemed to swap my PFD and MFD buttons.
When I click the new ‘swap’ button on the Hub software, this 'fixes' the G1000 buttons, but breaks the audio-panel buttons and rotaries.
The audio panel buttons do nothing, but the audio-panel rotary triggers PFD functions - yes, very odd!
Clicking the ‘swap’ Hub button again, fixes the audio-panel, and returns the PFD and MFD to being wrongly swapped (ie back to the original bug)

Temporary work-around: Physically swap the USB cable positions in your USB hub, of the PFD and MFD.

More details:
Unplugging one of the G1000 at a time, and restarting the Hub software, proved the G1000’s were still correctly configured (on-device) as PFD and MFD.
My 3 devices were plugged into my usb-hub consecutively, with the audio panel in the middle.

Fix required:
USB insertion order should have zero effect on behaviour.
The new ‘swap’ button should not affect the audio panel.

 

[akchuckj]

I'm having a similar problem after upgrading from V 1.14.4 to V 1.18.0. Most soft keys don't work and if I do have a button that works it shows up on the opposite screen. When I totally remove the flightsimbuilder hub and reinstall V 1.14.4 all is good! This is the same for V 1.19.1 that was just released. Anyone have a solution to this??

 

[numberonesuperguy]

Can you try to swap the USB cables around on your PC or USB-hub?
That’s how I’ve worked around it for now.

 

[akchuckj]

After the third update that didn't work I'm just sticking with V1.14.4 which works fine for me. Hopefully, at some time in the future the programmers will figure out what the glitch is.