Hillman66
New member
Hi,
I wanted to use my GNS 530 to control the G1000 as well so I setup Mobiflight (following the tutorial on YT linked here) which works great for the push-buttons, but for the rotary encoders it just sort of work. It often misses a turn and is just not reliable enough to be useable. I tried another HW device with rotary encoders and this worked fine and quite reliable. I tried connecting both to On-press, On-release and On-hold. On-release works best, but it misses many movement on the encoder.
Is there any trick to these encoders?
I wanted to use my GNS 530 to control the G1000 as well so I setup Mobiflight (following the tutorial on YT linked here) which works great for the push-buttons, but for the rotary encoders it just sort of work. It often misses a turn and is just not reliable enough to be useable. I tried another HW device with rotary encoders and this worked fine and quite reliable. I tried connecting both to On-press, On-release and On-hold. On-release works best, but it misses many movement on the encoder.
Is there any trick to these encoders?
